Sunday, August 2, 2015



We all have dreams. But in order to make dreams come into reality, it takes an awful lot of determination, dedication, self-discipline, and effort.(Jesse Owens)

There is never just one thing that leads to success for anyone. I feel it always a combination of passion, dedication, hard work, and being in the right place at the right time. (Lauren Conrad)

Our gratitude goes to the first generation of dedicated LENR scientists. Their heroic performance was  demonstrating beyond any doubt  that excess heat in the hydrogen metal systems is a reality , despite  the authoritative NO of mainstream science. However to do more is a great challenge because- see the second Motto- the problem was in the wrong place and in the wrong time.
The new generation of LENR researchers, scientists and technologists is coming now, the victors, the doers.
 Realistic and pragmatic, with minds in the system thinking mode and in the problem solving-confronting challenges mode, creating symbiosis of science and technology, focused on the essential aspects of LENR, free of myths and of professional prejudices oriented toward the future, ready to cooperate and to compete, living for the progress of this energy source. 
We have to enter an Era of LENR awakening. OK?


1) Some Q & A with LENZ on new Russian report
And look to the LENR Forum, David Nygren has built a communication bridge to these creative researchers! You can put them questions and you can read what they already have answered.

2) I think this will corrected, too good and too occasional to be true- in the electricity bill playing mode
COP E-Cat between 125 and 143
Andrea Rossi
August 1st, 2015 at 7:00 PM

Rethinking, what you ask for can be answered: the comsume of current when the 1MW E-Cat is in ssm, producing 1 MWh/h is betwen 7 and 8 kWh/h. The air conditioner is not included, because powered from a source independent from the E-Cat, as well as the light. Entertaining gadgets are Physics books, they do not consume current. The current is consumed by the control panels, triacs, transformers, safety systems.
Warm Regards,

Andrea Rossi
August 1st, 2015 at 4:26 PM

So far we are on schedule to finish within February 2016, but the term could be delayed: to know when we will finish the tests we return to the issue of the missed delivery of the crystal ball.
Warm Regards,

VIDEO reattore LENR Francesco Celani

SHT's former CEO, Konstantine Balakirian, a Soviet disinformation expert
No comment, but now I am not more so worried for oxygen nucleus being broken in lowly protons by LENR.


AXIL has left a new comment on your post\"INCREASING COMPATIBILITY OF METAL AND HYDROGEN-A M...": 
Remember DGT's slogan: "make hydrogen more reactive and nickel more receptive"

LenzandCoLab said:

"Probability of Heat excess is increased significantly if you add hydrogen support to the set up like Chinese or Focardi. Or just got Ni powder from the previous experiment to the reactor(or do it twice). And don't forget to add LiAlH4."

We discused this reuse of old fuel that was indicated in the Lugano fuel analysis as follows:

The is no evidence that nickel absorbs hydrogen to any great degree. What may be happening is that hydrogen is being chemically transformed into a form that is more receptive to the LENR reaction. In fact, the Russian experimenter recommends the use of fuel used in a prior reactor run.

I would recommend the process that Leif Holmild uses to produce hydrogen based Rydberg matter in his experiment.

With respect to the recent report by Ólafsson and Holmlid, "Holmlid used Shell 105 catalyst (Fe2O3-K based with >8% K content) - and only that (!!) - as an ultra-dense Rydberg state Deuterium generator because it's convenient to use, cheap and apparently because it works out of the box without further treatment (as also confirmed by Sveinn Ólafsson on LENR-Forum)."

NOTE: According to Shell, the 105 catalyst contains 84.3% iron as Fe2O3, 2.4 %chromium as Cr2O3 and 13.3% potassium as K2CO3.

Ólafsson and Holmlid report getting heat from the use of hydrogen and the 105 catalyst without the use of a laser.

The potassium provides a catalytic build template that convert the hydrogen to a solid form by using a Rydberg blockade process. 

The same effect can be achieved by using an electric arc. DGT used this method in their technology to produce hydrogen Rydberg matter.



  1. Rossi supports our President as do I, especially on heath care for all.

  2. Anyone know where to purchase the shell 105 catalyst?