Thursday, April 6, 2017


Image result for surgery "war quotationsI learned a long time ago that minor surgery is when they do the operation on someone else, not you Picture Quote #1

Winning is important also in a Trial decisive for the history of energy technology.


The basic trick of the great expert from Bucharest.

The truly great expert from the story of yesterday actually was not very talkative
but once I have invited him to a restaurant and I could apply the "Sue Ellen Principle" to him, see please:

Fast, much too fast for the standards of that age as well as his own age (50-550 he was drunk and started to reveal all his tricks. These are harming black magic  and i will not contribute to their dissemination; however evil-down-to-roots people will re-discover them beyond any doubt.. Just a short fragments, coming 'just in time":

"Gain power by accepting reality. Gain good money by altering the technical reality
as your generous customer wants it. What is the most straightforward methodology to alter reality?
The Devil is in the details and there are some details tht are the Devil himself. So take the situation as it is or it seems and add some venomous detail or subtract a really critical one- all that in your imagination- have courage and creativity in making assumptions and transforming them in "reality"

We have to learn  how to discovering, covering and recovering he truth

b) On the LENR fronts today.

 Other 38 Exhibits but the logical structure of the trial starts o become understandable.

For a very interesting aspect, please study:


Wednesday, April 05, 2017
245 misc Statement Wed 10:50 PM 
Statement of: Opposition to Third-Party Defendants' Statement of Undisputed Material Facts by IPH International B.V.(a Netherlands company), Industrial Heat, LLC(a Delaware limited liabililty company) re242 Joint MOTION for Summary Judgment Combined Motion for Partial Summary Judgment ,204 Corrected SEALED MOTION Third-Party Defendants Motion for Partial Summary Judgment(Mastrucci, Christina)
Att: 1  Exhibit 1,
Att: 2  Exhibit 2,
Att: 3  Exhibit 3,
Att: 4  Exhibit 4,
Att: 5  Exhibit 5,
Att: 6  Exhibit 6,
Att: 7  Exhibit 7,
Att: 8  Exhibit 8,
Att: 9  Exhibit 9,
Att: 10  Exhibit 10,
Att: 11  Exhibit 11,
Att: 12  Exhibit 12,
Att: 13  Exhibit 13,
Att: 14  Exhibit 14,
Att: 15  Exhibit 15,
Att: 16  Exhibit 16,
Att: 17  Exhibit 17,
Att: 18  Exhibit 18,
Att: 19  Exhibit 19,
Att: 20  Exhibit 20,
Att: 21  Exhibit 21,
Att: 22  Exhibit 22,
Att: 23  Exhibit 23,
Att: 24  Exhibit 24,
Att: 25  Exhibit 25,
Att: 26  Exhibit 26,
Att: 27  Exhibit 27,
Att: 28  Exhibit 28,
Att: 29  Exhibit 29,
Att: 30  Exhibit 30,
Att: 31  Exhibit 31,
Att: 32  Exhibit 32,
Att: 33  Exhibit 33,
Att: 34  Exhibit 34,
Att: 35  Exhibit 35,
Att: 36  Exhibit 36,
Att: 37  Exhibit 37,
Att: 38  Exhibit 38,
Att: 39  Exhibit 39,
Att: 40  Exhibit 40,
Att: 41  Exhibit 41,
Att: 42  Exhibit 42
244 respm Response in Opposition to Motion Wed 10:21 PM 
RESPONSE in Opposition re204 Corrected SEALED MOTION Third-Party Defendants Motion for Partial Summary Judgment ,242 Joint MOTION for Summary Judgment Combined Motion for Partial Summary Judgment filed by IPH International B.V.(a Netherlands company), Industrial Heat, LLC(a Delaware limited liabililty company). Replies due by 4/12/2017. (Mastrucci, Christina)
243 respm Response in Opposition to Motion Wed 9:53 PM 
RESPONSE in Opposition re207 Supplemental MOTION for Summary Judgment [Statement of Material Facts] ,203 MOTION for Summary Judgment Related [+] filed by James A. Bass, Fulvio Fabiani, J.M. Products, Inc., Henry Johnson, United States Quantum Leap, LLC. Replies due by 4/12/2017.(Nunez, Rodolfo)
Att: 1  Exhibit A,
Att: 2  Exhibit B,
Att: 3  Exhibit C,
Att: 4  Exhibit D,
Att: 5  Exhibit E,
Att: 6  Exhibit F,
Att: 7  Exhibit G,
Att: 8  Exhibit H,
Att: 9  Exhibit I,
Att: 10  Exhibit J,
Att: 11  Exhibit K,
Att: 12  Exhibit L,
Att: 13  Exhibit M,
Att: 14  Exhibit N,
Att: 15  Exhibit O
242 motion Summary Judgment Wed 4:19 PM 
Joint MOTION for Summary Judgment Combined Motion for Partial Summary Judgment by James A. Bass, Fulvio Fabiani, J.M. Products, Inc., Henry Johnson, United States Quantum Leap, LLC. Responses due by 4/19/2017(Leon de la Barra, Francisco)
Att: 1  Exhibit,
Att: 2  Exhibit,
Att: 3  Exhibit,
Att: 4  Exhibit,
Att: 5  Exhibit,
Att: 6  Exhibit,
Att: 7  Exhibit,
Att: 8  Exhibit,
Att: 9  Exhibit,
Att: 10  Exhibit,
Att: 11  Exhibit,
Att: 12  Exhibit,
Att: 13  Exhibit,
Att: 14  Exhibit
241 order Order on Motion for Leave to File Wed 4:05 PM 
ORDER granting239 Motion for Leave to File Combined Motion for Partial Summary Judgment. Third-Party Defendants shall file re-file their combined motion for partial summary judgment by April 5, 2017. The summary judgment motion will be deemed filed as of March 22, 2017. This Order does not affect the deadline for filing responses to the summary judgment motion. Signed by Judge Cecilia M. Altonaga on 4/5/2017. (ps1)
240 motion Appeal/Objection of Magistrate Judge Order to District Court Wed 1:57 PM 
Plaintiff's APPEAL of Magistrate Judge218 Order to District Court (Chaiken, Brian)
239 motion Leave to File Document Wed 11:50 AM 
MOTION for Leave to File Combined Motion for Partial Summary Judgment by James A. Bass, Fulvio Fabiani, J.M. Products, Inc., Henry Johnson, United States Quantum Leap, LLC. Attorney Rodolfo Nunez added to party James A. Bass(pty:3pd), Attorney Rodolfo Nunez added to party J.M. Products, Inc.(pty:3pd), Attorney Rodolfo Nunez added to party Henry Johnson(pty:3pd). (Nunez, Rodolfo)
See please the newest ones here:

2) New THREAD on the LENR Forum
Joshg's Mathisian Physics Paper.
Rossi Fan Club - Official Members
April 6, 2017 at 1:40 PM

Dr Rossi,

We have always admired your strength and courage and you have proved yourself many times over, we are praying for your speedy recovery!


1) Web’s Inventor Tim Berners-Lee Wins the Nobel Prize of Computing

2)Graphene May Be the Key to Drinkable Ocean Water

3) Now it’s time to prepare for the Machinocene


  1. Peter,

    This comment is just my impression based on reading much of the commentary at ecatworld that you linked to re the steam handling systems built for the 1MW test plant.

    Engineer48 makes a lot of *very convincing* points about the flow pipes and IMHO endorses your constant criticism of the attacks on the system about half filled pipes particular from Jed Rothwell who it now appears really did not understand what he was talking about and that seems ok allowing that he had no expertise in this area but Jed should not have gone public (ballistic) with his hollow arguments re the water flow in the pipes, in the way he did. He has lost all credibility.

    Below are a summary of points made by Engineer48 that to me are convincing ...

    Engineer48 Mats Lewan • 16 hours ago
    Hi Mats,

    I do appreciate the info Smith has provided, especially the photos of the inside of the JM Black Box that shows the 92,670 L/Day capacity primary Condensate flow pump, the images of the condensate pipe to the ECat, showing the Flow Meter and the statement that the internal condensate holding tank is vented to atmo via a condensate vent pipe, which I was able to find and identify.

    What we now know is:

    1) There is more than ample capacity to pump 32,000 L/Day of condensate.

    2) There is an unconventional design steam trap on the OUTLET of the heat exchanger inside the JM Black Box.

    3) There is a vent pipe on the condensate system inside the ECat that will maintain a 2-3m head of water pressure at the bottom of the condensate tank & Flow Meter.

    4) That vent pipe and the 2-3m head of water it generates will ensure the Flow Meter is always filled with fluid.

    5) This kills a lot of past speculation about partly filled flow meter and there not being enough total pump capacity to supply the stated 32,000 L/Day.

    6) There is an unconventional steam trap and steam recovery system on the OUTLET of the heat exchanger inside the JM Black Box.

    7) There are 4 pipes running up the wall from the JM Black Box and across the ceiling. Where they go is uncertain but they do support there was another heat exchanger in the upper story of the warehouse.

    Overall Smith has done a good job for Rossi.

  2. The link to the comments and topic.

  3. These comments also deserve airing as I agree 100% with Bob Greenyer's thanks to Engineer48.


    Bob Greenyer Engineer48 • 12 hours ago

    Whilst I do not normally comment on AR/IH epic I must say that your most recent diagram linking to photographic evidence appears to be the most accurate depiction of the operation of the '1MW' unit.

    Filling the reactors part way would ensure super heating steam. the position of the pipes all make logical sense.

    As far as I can tell, the 'black box' is just a MASSIVE radiator designed to very evenly release the heat which would mean that the thermal sink side would have a VERY long time constant. This would lead to very stable data.

    The copper pipes at the bottom I think are some kind of heat pipe arrangement - though this is pure speculation.

    What you are presenting is

    1. just coherent facts based on photos and logic, regardless of your position
    2. refreshingly consistent and is following all the evidence rather than trying to prove a position.
    4 • Reply•Share ›

    Engineer48 Bob Greenyer • 12 hours ago
    Hi BG,

    Comments appreciated.

    Thanks to Smith's new images, the holes in my earlier system schematic has been filled in and I now have a very good understanding of how the system worked from an engineering design standpoint.

    My position has always been that which the images show, plus a few hints from Rossi, ie he told me there was another much bigger condensate pump that supplied most of the condensate flow and that the 6 small pumps per Tiger were just topping up pumps to maintain a constant water level inside the Tigers.

    What he shared was backed up by the photographic data.

    1. So what was the actual 'product' which was produced by JM Products? Apparently nothing!
      And was there any real manufacturing IP of the 'customer' which necessitated making the JMP area out of bounds to IH or anyone else? Apparently not!

      What secret customer intellectual property would have been observed by anyone looking inside the JMP area? None at all apart from the perception that nothing was actually been done other than dissipating a small amount of heat?
      Is this why Murray was not allowed by Rossi to visit the site? Probably.
      It was claimed that his exclusion was on the grounds that he might be a risk to the IP. What IP? Nothing was being produced. Oh, maybe that was the secret which was not to be released. That makes sense. That would have made the whole operation look a bit farcical wouldn't it? It certainly does now, so I'm sure it would have then.

      By the documentation so far released, even the most cursory assessment makes it obvious there was never any production of anything real in the sealed black shipping container in the JMP 'customer' area.

      Given then, that the secret customer who allegedly insisted on their anonymity was all a fabrication, why was this deception necessary, particularly in relation to keeping this information from IH? It must have been a secret kept from IH because according to the emails, Darden wanted to meet up with the supposed UK parent company while he was in the UK, but was persuaded not to by Mr Rossi. They didn't wan tot be contacted apparently. Well I bet they didn't, since they weren't involved at all. Why didn't Rossi make this clear to IH at the time? He should have said "Don't bother Tom. They don't have anything to do with any of it."
      But of course, he didn't. He is reply simply continued the charade. Why did he do this since he obviously knew it was a deception?

      I would have thought it should have been the right of IH to know exactly all the facts relating to the test prior to and during the entire period of the testing. And they should have had the option to reject any test under those conditions because since there was no proper verification of the results, the supposed results of the whole year long test are worthless.

      I'm pretty sure that had they known what is now made known, they would not have agreed to or paid for any of it.
      And as is now well known, now that they do know, they have refused to pay for any more of it, even though the claimed results are nothing short of spectacular. Well, they would be if there was any prospect of them being real, but under the conditions of the data acquisition now revealed, the prospect of this is so small as to be negligible.

      Is it reasonable to assume that in spite of all this deception, the ecat actually generated up to a megawatt of power 24 hours a day for a whole year and it was just dissipated through the walls of a sealed shipping container into a small commercial unit, to be dispersed through a ceiling vent? I don't think so.


  4. This information is impressive; I am inspired with your post writing style & how continuously you describe this topic.

    Payday loans in Alabama
    Title loans in South Carolina

  5. Paul Wigner, "Nuclear reactions in distant collisions":
    "The Fact that nuclear reactions of the type Au197 + N14 -> Au198 + N13 ("nuclear transfer reactions") take place at energies at witch the colliding nuclei do not come in contact is an interesting though little advertised discovery"

  6. How I Got My Loan From A Genuine And Reliable Loan Company

    My name is Mrs SMITH STEPHANIE. I live in Singapore and I am from france and i am a happy woman today? and i told my self that any lender that rescue my family from our poor situation, i will refer any person that is looking for loan to him, he gave me happiness to me and my family, i was in need of a loan of $150,000,00 and was scammed by those fraudulent lenders and a friend introduce me to MR IBRAHIM MUSA,and he lend me the loan without any stress,you can contact him at (

    1. Your Full names:_______
    2. Contact address:_______
    3. Country Of Residence:______
    4. Loan Amount Required:________
    5. Duration:_____
    6. Gender:_____
    7. Occupation:________
    8. Monthly Income:_______
    9. Date Of Birth:________
    10.Telephone Number:__________

    Email Him at: